inBio160 PoE Bundle
inBio160 PoE Bundle
  • IP-Based Advanced Access Control Panel
  • 1 PoE Splitter(25W)

InBio160 carries out the matching of fingerprints on the panels. The FR Series of readers transmit fingerprint templates to InBio160 via RS-485 for fast and accurate matching with templates stored in a data-base.

In this bundle, the PoE splitter can offer 12V 2A DC for both InBio160 and one 12V DC lock. On the input side, just need connect the splitter to a PoE switch.

Choice of Readers

Full range of card readers supported. ZK KR-Series readers are stylish and waterproof. InBio supports any wiegand-output reader, including HID Prox, iClass, and XceedID Multi-Technology.

Lowest Total Cost of Ownership

InBio controller firmware can be upgraded in the field. New controller features can be loaded without any advanced tools, extending and expanding the value of
your investment.

Door Control and More

Along with relay contacts for controlling door locks, easily programmable auxilary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.

Advanced Access Control Built-In

Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxilary Input/Output Linkages are built into controller firmware.


InBio controllers installed easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery function make the setting and modification of network parameters direct and easy.


10,000 events and transactions. Controller is backed up in real-time in on-board optional SD card. Data is preserved when power failure. Controller continues to operate if network connection is interrupted.


InBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture.

For Software Developers

Free SDK is available for integrators and OEM’s to integrate the InBio controllers with their or existing security or personnel management applications. Upon request, ZK can also customize InBio firmware to meet any custom requirements.

User Capacity





Event Buffer

100,000 transactions


RS485, Ethernet

Nominal Voltage of InBio160


Standby Current of InBio160


Operating Temp

0°C~ 45 °C

Operating Humidity

20%~ 80%

Number of doors controlled

One door

Number of readers Supported


                      Aux. Input



Aux. Output


Types of readers supported

26-bit Wiegand, others upon request

Number of Inputs

2 (Exit Device and Door Status)

Number of Outputs

2 (One Form C relay for lock and one Form C relay for Aux output)



Dimensions (Bundle Only)

305.2mm × 298.4mm × 89mm

Dimensions ( Board Only)

183mm × 106mm

Specification of POE Splitter

Maximum Power

15.4W (IEEE 802.3af);25.5W (IEEE 802.3at)

Input voltage


Output voltage:


Network standards

IEEE802.3i 10 BASE-T

IEEE802.3i 100 BASE-TX

IEEE802.3x flow control

IEEE802.3af/ IEEE802.3at

Working Temperature

0°C ~ 45 °C

Interface protection

Meet the IEC61000-4-2 (ESD) ± 15KV (air), ± 8KV (contact) requires

Able to withstand 8/20us 24A (12A) energy


an input RJ45 interface


an output RJ45 connector and a DC output interface

Data transfer rate


The maximum transmission distance

100 meters


inBio160 POE Bundle

2.14 Mb Data Sheet

inBio160 POE Bundle User Manual

2.63 Mb User Manual